2024 Beneteau America Oceanis Yacht 54

• Design made following European Directive requirements and according to CE certification

• ISO 12215 certified structure

• Balsa sandwich infused hull

• Vacuum infused structural inner liner (Fabric - resin) bonded to the hull

• Deck in glass fiber/balsa wood sandwich infusion, with non-slip "diamond point" surface

• Cast iron keel attached with bolts and bonded stainless steel backplate

• Twin rudders affixed with stainless steel stock

• White hull - Aluminum grey hull decoration

• 8 Hull portlights

RIGGING

• Depending on version:
  - Aluminimum mast with in-mast furling deck-stepped, 2 Aft swept spreaders
  - Performance classical aluminimum mast deck-stepped (+ 1,80 m / 5’11’’) 3 Aft swept spreaders

• Split backstay (Hydraulic optional extra)

• Single-strand rigging

• Anodized aluminum boom

• Harken blocks at mast foot

• Rigid boom vang

• 2 Stand-up blocks for mainsail sheet on mainsail cradle

• 1 Self-tacking jib track with traveller

• All lines lead back to the helm stations (except boom uphaul and
  Genoa halyard)

• Complete running rigging:
  - Main halyard
  - Genoa halyard with tensionning track on the mast - Boom topping lift with cleat on mast
  - Mainsheet
  - 1 Self-tacking jib sheet

• Mainsail furler and self-clinching jib furler on deck

• 7 Halyard clutches (1 triple to starboard, 2 doubles to port)

• Halyard covers

• 1 Flag halyard

WINCHES

• 1 Manual self-tailing winch to starboard (H50.2 STA)
• 1 Port side manual self-tailing winch (H50.2 STA)
• 1 Aluminum Speed Grip winch handle
• Stowage of which handles in dedicated space in rope bags
  
  

SAILS (INCIDENCES)

• Dacron furling mainsail with Natural UV protection
• Dacron self-tacking jib with Natural UV protection
  
  

MOORING - ANCHORING GEAR

• Polyester bowsprit with integrated anchoring gear and bobstay with spinnaker chainplate (for Code 0 and asymmetric spinnaker)

• Self-draining chain locker, Clench bolt, Piston-driven cover

• Single roller stainless steel bow fitting

• 12 V - 1 500 W vertical electric windlass - Remote control in mooring locker

• 6 Aluminum mooring cleats (Length: 40 cm / 1’4’’)

• Stainless steel chafing plate

SAIL LOCKER

Access through T70 deck hatch, Passage width: 0,65 x 0,65 m / 2’2’’ x 2’2’’

• Stainless steel ladder
• Shelving and stowage trays
• LED lighting
• 1 115 V Power outlet

SAFETY ON DECK

• 1 Stainless steel open pulpit

• 2 Stainless steel aft pulpits with integrated fairlead

• 1 Stainless steel aft central pulpit (Height: 960 mm / 3’2’’)

• 4 stainless steel handrails on coachroof (2 Genoa track)

• 1 Lifebuoy support bracket on aft pulpit

• Wooden flagstaff (1 m/3’3’’) with integrated support on deck

• Double life lines and stainless steel stanchions (Height: 620 mm / 2’) - Side boarding gate on either side

• Emergency ladder on pushpit

   

COCKPIT

• Self-bailing cockpit
• Teak decking
• 2 Sail lockers below cockpit seating
• 2 Stowage lockers behind the cockpit with stainless steel support for the fenders (650 x 390 mm / 2’2’’ x 1’3’’)
• 1 Access hatch to tender garage
• 2 Cockpit tables on stainless steel fixed base, teak table top with 2 extension leaves, stainless steel cup holders on the ends with handrail function and 1 long handrail along its full length (electric base in trim)
• Teak slats on cockpit benches
• 2 Aft helmsman's seat with stowage, teak slats
• Side helm seats, slatted teak
• Foldaway helmsman foot chock
• 2 Steering wheel consoles: 
• Stainless steel steering wheels with anthracite leather covering (diameter 900 mm/2’11’’) fixed on white, aluminum lacquered pedestral
• Steering gear at the helm station
• Stainless steel steering chain transmission system
• Black lacquered stainless steel hand rail
• 1 Emergency tiller
• 1 Steering compass on port console
• Engine throttle and control panel on starboard
• 1 PPMA folding companionway door in the bottom of the cockpit -Sliding hatch made of PMMA
• Liferaft locker in front of the companionway (Space for 12 person liferaft: 0,96 m x 0,59 m x 0,40 m / 3’2’’ x 1’11’’ x 1’4’’)
• Courtesy lighting (7 LED lighting points, warm white lighting)
• 2 Waterproof exterior speakers

SWIM PLATFORM / AFT TRANSOM

• Fully opening transom, convertible into swim platform (2,61 m x 0,93 m / 8’7’’ x 3’1’’)
• 3 Folding access steps to the cockpit to starboard
• Electrically controlled opening on console
• Teak decking on swim deck
• 1 Stainless steel, removable bathing ladder with dedicated stowage
  in the cockpit

TENDER GARAGE
Accessible from the platform and from the cockpit
Can be used to house a Highfield UL240 type tender (2,48 m x 1,69 m x 0,80 m / 8’2’’ x 5’7’’ x 2’7’’)

• 1 Touch-operated ceiling LEDs
• Tender launching system, avaliable as an option
• 1 Cockpit shower with mixer tap in the tender garage