2024 Beneteau America Figaro Beneteau 3 (American Edition)

HULL

• Polyester sandwich - Infused PVC foam • Infused PVC foam structure with the hull

DECK

• Polyester sandwich - Infused PVC foam

• Infused PVC foam structure with the deck

• Polyester sandwich bulkheads and transversal structure - Infused PVC foam

• The transversal structure and the bulkheads are "methacrylate" glued in the hull

• Mast and keel well bulkheads overlaminated to the hull

KEEL AND FOILS

• Cast iron keel with mixed cast iron/lead ballast treated by spraying with molten zinc
• 1 pair of independent and retractable carbon / epoxy foils
• Full rigging for independent foil rake adjustment
• Each foil is manually adjustable by tackle with return to cockpit

RIGGING

• Carbon mast HM40 placed on deck
• 2 Aft swept spreaders
• Glued Antal track
• Dyform forestay, rod shrouds
• Adjustment of double running backstays by 2:1 tackle with return on each side
• Black anodised aluminum boom
• Rigid boom Boomkicker vang + tackle
• Harken headfoil
• Delivered without sails

RUNNING RIGGING

• 1 2:1 Mainsail halyard
• 1 Masthead
• 1 Fractional Genoa / Spinnaker halyard
• 1 Genoa halyard
• 2 Genoa sheets
• 2 Spinnaker sheets and guys with barber adjustment
• 1 Mainsail outhaul with tackle
• Mainsail sheet traveller and genoa car adjustments
• 2 reef lines
• 1 Mainsail Cunnigham

RUDDER

• Polyester twin-rudders hung with stainless steel shaft
• Rudder with 2 self-aligning bearings
• Link bar equipped with ball joints for dynamic adjustment

DECK FITTINGS

• Mainsail sheet traveller on rear skirt

• Deck equipment Harken and Ropeye

• Lewmar clutches for halyards and adjustments

• Mainsheet adjustment with fine tune on central console

• Cam-Matic ® cleats on roof return

• 2 Winch handles

• 2 Flat-deck return blocks for genoa sheets

• 2 Flat-deck return blocks for running backstays

• 2 Constrictor ® textile clutches for running backstays

• 2 Genoa transversal tracks on side deck 3D adjustment

• Shroud and lower shroud chainplates on side of hull

• 2 Running backstay chain plates

• Mast socket fitting with integrated Harken blocks

• Watertight hatch on roof for access to weighing point

• Fixed carbon bowsprit

COCKPIT

• 1 Stainless steel tiller with Spinlock telescopic tiller extension

• Manual bilge pump near the helmsman

• 1 Navigation compass on side of roof

• Liferaft storage in the central compartment

• Adjustable stainless steel helmsman footrests

• Swimming ladder on rear skirt

SAFETY ON DECK

• 2 Stainless steel pulpits with load strut

• 2 Stainless steel pushpits

• 1 Central stainless steel stanchion on rear skirt

• 1 Pair of front stanchions with rollers

• 3 Pair of stanchions with load struts

• 2 Unsheathed lifelines

• Toe rail and footrest integrated in the deck moulding

• 2 Stainless steel handrails on coach roof