2024 Beneteau America First 24 SE (American Edition)
The First 24 SE is a modern high-tech sport cruiser, capable of delivering thrilling performance in a versatile package that is easy to use and maintain. She is of course trailerable, and her smart mast-raising system allows a single user to launch and go, giving her access to a wide variety of cruising and racing grounds, from international one-design regattas to coastal adventure races. And at the end of the day, she will welcome you with a basic but smart interior, offering all basic cruising amenities for four people. No matter the mode, she is a pure sailing sensation.
Basic Boat Info
Dimensions
-
Hull and deck constructed with vacuum infusion of Vinyl ester resin, Airex PVC foam and Soric GRP sandwich with unidirectional and multiaxial laminates
-
The hull is reinforced with infused GRP stringers in the keel and in bow sections
-
The deck comes with high traction non-skid moulded antiskid,
-
Two transoms hung rudders built of GRP foam sandwich and
aluminium casings
-
Hull and deck are moulded in single tone off-white RAL 9003,
-
The hull is prepared for the application of antifouling.
-
Swinging keel build in GRP vinyl ester composite with lead bulb insert
-
Manually operated stainless steel keel winch
-
Keel head and edges protected with epoxy primer
-
Slotstrip / keel lips closing the exit of the keel box
-
45 cm / 18 inch high pushpit, pulpit and stanchions with a single lifeline
-
Two lifeline cushions
-
Stainless steel bow and stern mooring cleats
-
Stainless steel chain plates for shrouds and forestay
-
Coachroof mounted opening hatch 58 cm x 58 cm / 23 x 23 inch for access to the cabin
-
2x Harken STA20 winches on the coachroof
-
2x Ronstan jib tracks with blocks on the coachroof
-
Spinlock clutches for halyards and control lines
-
Ronstan blocks and cleats for other controls
-
Carbon-look tiller with Ronstan tiller extension
-
2x First branded rope bags from Outils Océans
-
Tempered glass windows on each side of the coachroof
-
Spacious storage under the cockpit area with two big hatches
-
Manual bilge pump
-
Attachment point for indoor/outdoor table in the cockpit
-
Attachments for engine bracket
-
Numeric lock for the main companionway
-
Compotech mast and boom with one set of swept-back spreaders, all built in high-quality carbon fibre
-
Carbon parts UV protected
-
Continuous 1x19 standing rigging with bottle screw adjusters
-
8:1 outhaul and two reefs
-
Retractable carbon bowsprit controlled from the cockpit
-
One tapered mainsheet with mainsheet tackle of ball bearing low
-
Friction blocks
-
12:1 boom vang
-
Two jib sheets
-
One 2:1 Dyneema main halyard
-
One Dyneema jib halyard
-
One Dyneema fractional spinnaker halyard • Two reef lines
-
One bowsprit control line
-
One spinnaker tack line
-
Two tapered spinnaker sheets
-
One 8:1 cunningham control line
-
Facnor FLT jib furler with the furling line
-
Mast transport cover